Home > AcrEase Finish Cut Mowers > Model Pro60K

Model Pro60K

60" Professional Model with Kohler Command Engine (18HP) or Kohler Confidant Engine (25HP)

Please click the following link to download a parts diagram.

http://www.kunzeng.com/parts-diagrams/
Products (Total Items: 150 )
Sort by:
3910
003910 - Rear Floatation Kit for all 60" Pro Finish Cut Models
$200.00
3911
003911 - Front Floatation Kit for all 60" Pro Finish Cut Models
$170.00
202019
202019 - Hex Head Bolt - 5/16" x 3/4" Long
$0.18
202040
202040 - Hex Head Bolt - 3/8" x 1-1/2" Long
$0.21
202063
202063 - Hex Head Bolt - 1/2" x 3-1/2" Long
$1.68
202064
202064 - Hex Head Bolt - 1/2" x 3-3/4" Long
$1.95
202135
202135 - Hex Head Bolt - 3/8" x 3" Fully Threaded
$0.81
202136
202136 - Blade Bolt - 1/2" x 1" NF
$0.69
202140
202140 - Hex Head Bolt - 5/8" x 7.5"
$6.65
204000
204000 - Shoulder Bolt - 1/2" x 1-5/8" Shoulder Length
$3.24
204002
204002 - Eye Bolt - 5/16" x 4" Usable Length
$0.90
204015
204015 - Eye Bolt - 1/2" x 4" Usable Length (Welded)
$3.69
212001
212001 - Hex Nut - 5/16"
$0.06
212002
212002 - Hex Nut - 3/8"
$0.09
212003
212003 - Hex Nut - 1/2"
$0.21
212009
212009 - Hex Nut - 1.00" - 14NF
$2.31
212013
212013 - Hex Nut - 5/8"
$0.42
214001
214001 - Lock Washer - 5/16"
$0.03
214002
214002 - Lock Washer - 3/8"
$0.06
214003
214003 - Lock Washer - 1/2"
$0.12
214005
214005 - Std. Flat Washer - 3/8"
$0.09
214006
214006 - Std. Flat Washer - 1/2"
$0.36
214013
214013 - Lock Washer - 1.00"
$0.60
214014
214014 - Machinery Washer - 1.00" I.D. x 18 GA Thick
$0.24
214017
214017 - Std. Flat Washer - 5/16"
$0.06
214018
214018 - Machinery Washer - 5/8" I.D. x 1" O.D.
$0.21
214019
214019 - Machinery Washer - 1" I.D. x 1.5" O.D. x 10GA
$0.36
214020
214020 - Lock Washer - 5/8"
$0.24
214021
214021 - Cup Washer - 5/8" I.D. x 1-3/4" O.D. (Wheel Bearing Protector)
$1.23
214029
214029 - Std. Flat Washer - 5/8"
$0.45
214030
214030 - Cup Washer - 5/8" I.D. x 2-7/16" O.D. (Wheel Bearing Protector)
$1.50
215000
215000 - Cotter Pin - .156" x 1.00" Long
$0.09
216002
216002 - Wire Lock Pin - 5/16" x 2-1/2" Opening
$8.76
216006
216006 - Wire Lock Pin - 3/8" x 2-1/4" Opening
$9.51
216009
216009 - Screw Pin Shackle Clevis - 1/2" Body Dia.
$11.34
216011
216011 - Wire Lock Pin - 1/2" x 3-1/2" Opening
$10.74
222005
222005 - Worm Drive Hose Clamp - 7-7/8" to 9-1/8" Clamping Dia.
$14.31
222012
222012 - Single Split Collar - 1" I.D. x 1/2: Thick
$7.11
222014
222014 - Worm Drive Hose Clamp - 2-5/16" to 3-1/4" Clamping Dia. - Used with Carbon Canister 277036 (California Only)
$4.47
222016
222016 - Worm Drive Hose Clamp - 9-1/4" to 10-1/8" Clamping Dia. - Used with Fuel Tank 277045 (California Only - 2020 and Newer)
$13.14
225000
225000 - Compression Spring - 1.50" Long x 1-3/32" O.D. x .135" Wire dia.
$3.57
226000
226000 - Wheel - 3" O.D. x 1/2" I.D. x 1-1/4" Wide, Plastic
$2.10
226006
226006 - Tire - 15/600 x 6, 4 Ply Turf - Replacement for 226003 & 226012 Wheel Assy.
$40.64
226012
226012 - Wheel Assy. - 15/600 x 6, 4 Ply Turf (Includes Tire, Rim & Bearings) - Offset
$93.78
226016
226016 - Wheel Assy. - 13/500 x 6, 4 Ply Slick (Includes Tire, Rim & Bearings) - Centered
$86.10
235062
235062 - Cable Assembly - Two Wire Harness with Diode for Clutch 258018
$20.67
238002
238002 - "V" Belt - B Section, 127" O.C.
$67.23
238009
238009 - "V" Belt - B Section, 127" O.C. (Kevlar Upgrade for 238002)
$95.88
241001
241001 - Flat Idler Pulley - 4" O.D. x 3/8" Hole (Steel)
$19.35
241007
241007 - "V" Sheave - 5-1/4" Dia. - 25 mm Bore (Spindle Pulley)
$26.79
243000
243000 - Bronze Bearing - 1/2"I.D. x 3/4" O.D. x 1.50" Long
$5.40
243003
243003 - Ball Bearing - 6205 - 2RST (Finish Mower Spindles)
$12.03
243007
243007 - Wheel Bearing - 1-3/8" O.D. x 5/8" I.D. - Precision Sealed
$3.45
243010
243010 - Plastic Bearing - 1-3/8" O.D. x 1.00" I.D., Flange, Nylon
$2.28
243015
243015 - Wheel Bearing - 2" O.D. x 1" I.D. - Precision Sealed
$9.45
257503
257003 - Oil Filter - Kohler (52-050-02-S)
$12.97
257507
257507 - Air Filter - Kohler (12-083-10-S) (Filter Only Use 257508 Also)
$16.97
257508
257508 - Pre-Cleaner - Kohler (12-083-12-S) (Use with 257507 Air Filter)
$5.97
257534
257534 - Air Filter - Kohler (16-083-01-S) (Filter Only Use 257535 Also)
$34.47
257535
257535 - Pre-Cleaner - Kohler (16-083-02-S) (Use with 257534 Air Filter)
$5.97
257538
257538 - Manifold/Muffler (Single Piece) (Used on Kohler Confidant Engines - Replaces Older Two Piece Systems)
$120.03
258018
258018 - Electric Clutch - 200 ft-lb, 5" "V" Sheave, 1" Bore
$278.91
258019
258019 - Electric Clutch - 125 ft-lb, 5" "V" Sheave, 1" Bore
$215.61
258020
258020 - Spindle Assy. - Includes Housing with Bearings, Shaft with Blade Bolt and Pulley
$163.53
259001
259001 - Mower Blade - 2" Wide, 20" Long, 1/2" Hole
$22.62
260004
260004 - Roll-Over Valve with Gromet Kit - Used on Fuel Tank 277034 & 277040
$19.23
264000
264000 - Solenoid - 12V, 1/4" Posts (Replaces 264002)
$41.04
264001
264001 - Ignition Switch - 5 Prong, Thread/Nut Mounted
$24.18
264003
264003 - Hour/Tach Meter - Digital Read Out
$67.08
264004
264004 - Battery - 12V, AGM (Absorbed Glass Mat), Sealed
$75.00
264005
264005 - PTO Switch - Pull Knob for On/Off, Snap-in Mount
$28.65
264006
264006 - Fuse Holder - Thread/Nut Mounted (Holds Glass Tube Type 1/4" x 1-1/4" Fuses)
$8.28
264007
264007 - Fuse - 10 Amp (Glass Tube, 1/4" x 1-1/4")
$1.71
264010
264010 - Ignition Switch - 7 Prong, Thread/Nut Mounted
$15.81
264014
264014 - Fuse - 10 Amp (Mini Blade Type - Use Only With Inline Fuse Holders)
$0.78
269001
269001 - Throttle Control - 15" Length, Lever Style
$13.38
269004
269004 - Choke Control - 14" Length, Pull Knob Style
$7.02
269008
269008 - Throttle Control - 46" Length, Lever Style
$16.29
269011
269011 - Choke Control - 46" Length, Pull Knob Style
$9.75
275001
275001 - Decal - Control Panel - Starting Instructions
$3.39
275002
275002 - Decal - Warning - General
$1.65
275003
275003 - Decal - Danger - Cut Finger
$0.91
275007
275007 - Decal - Warning - Belt Sheild
$0.81
275019
275019 - Decal - Name - ,Kunz
$1.50
275021
275021 - Decal - Name - AcrEase
$2.01
275023
275023 - Decal - Name - 60" Finish Cut
$1.59
277002
277002 - Grommet - 3/8" ID x 7/8" OD, Rubber
$0.42
277004
277004 - Tube Spacer - .32" ID x 3/4" OD x 3/4" Long, Nylon
$1.02
277013
277013 - Gas Cap - Venting Style (For Fuel Tank 277010 and with Fuel Tank 277034 Without Vent Hose)
$25.59
277025
277025 - Tire Sealer - 32 oz Bottle (Each AcrEase Rough Cut Mower Tire Requires 16 oz)
$27.60
277034
277034 - Fuel Tank 3 Gal. (Replaces Fuel Tank 277010)
$238.95
277035
277035 - Gas Cap - Audible Click / Tethered, Non-Venting (Only Use with Fuel Tanks with Vent Hose)
$22.08
277036
277036 - Carbon Canister - 300cc (California Only)
$36.00
277040
277040 - Fuel Tank 3 Gal., 3-Layer
$238.95
277041
277041 - Fuel Tank Grommet (Bottom Petcock Location) (Used on 277010, 277034 & 277040)
$5.94
277042
277042 - Spare Key for Indak Ignition Switches (Used on 264001 & 264010)
$1.39
277045
277045 - Fuel Tank 3 Gal. - EPA/CARB with Cap (California Only - 2020 and Newer)
$190.68
600006
600006 - Hitch Stop Angle - Mounting Point on Rear Hitch 900009 (5/16" Mounting Hole)
$3.45
600009
600009 - Hitch Extension - Rear Support Brace on Hitch Assy. 900028
$9.21
600043
600043 - Hitch Extension - Telescoping Portion of Hitch Assy. 900028
$22.74
600044
600044 - Hitch Adaptor Plate - Adjustment Plat for Hitch Assy. 900028 (Multiple Rows of 1/2" Holes)
$16.77
600048
600048 - Solenoid Support - Used to Mount Solenoid
$3.63
600062
600062 - Belt Sheild - Left Hand Side (Used on all 60" Finish Cut Mowers Except Models 3700 and 3701)
$25.38
600063
600063 - Belt Sheild - Right Hand Side (Discharge Side)(Used on all 60" Finish Cut Mowers Except Models 3700 and 3701)
$25.38
600146
600146 - Crank Arm - For Manual Height Adjust System on All Rough Cut and Pro Model Mowers (Incluces Press-on Nut)
$11.04
600195
600195 - Clamping Flat - Upper Flat Used to Mount Floatation Kits on Rough Cut and Pro Model Mowers
$7.92
600198
600198 - Clutch Stop - Prevents Electric Clutch From Spinning (Used on All Electric Clutch Models)
$5.34
600201
600201 - Engine Support Bracket - Engine Mount For Pro Models, C60V & C60BE Finish Cut Mowers
$43.95
600204
600204 - Bearing Spacer - 1-5/16" OD x 3.62" Long (For Spindle Assy. 258020)
$14.40
600212
600212 - Upper Pivot Support - Holds Height Adjust Nut 900062 on Pro Model Mowers
$7.77
600219
600219 - Tongue Pivot Angle - For Short Tongue 900138
$9.93
600228
600228 - Spacer - For Short Tongue 900139
$1.62
600229
600229 - Spacer - 1.32" O.D. x .133" Wall x .70" Long (Electric Clutch Spacer for Pro Models & C60BE)
$1.77
600291
600291 - Canister Support - Mounts Carbon Canister 277036 to All Finish Cut Models and 44" Rough Cut Models (California Only)
$5.62
600301
600301 - Wheel Bearing Spacer (Used on 226003 & 226008)
$4.42
600302
600302 - Wheel Bearing Spacer (Used on 226004, 226007 & 226009)
$4.51
600305
600305 - Control Panel (Replaces 900023 & 900111)
$21.30
600306
600306 - Tank Support - Rear Support for Gas Tank (Used on All Rough Cut Models) (Replaces 900079)
$14.55
600308
600308 - Spanner Tube - Used on Rear Wheel Assemblies 226012 and 226014
$4.56
600309
600309 - Spanner Tube - Used on Front Wheel Assemblies 226013, 226015 & 226016
$5.49
600317
600317 - Control Panel - Used with Fuel Tank 277045 (California Only - 2020 and Newer)
$25.56
600318
600318 - Tank Support - Used with Fuel Tank 277045 (California Only - 2020 and Newer)
$20.91
600319
600319 - Roll-Over Valve Shield - Used with Fuel Tank 277045 (California Only - 2020 and Newer)
$5.43
900026
900026 - Telescope Hitch - Main Section for Telescoping Hitch Assy.
$42.90
900028
900028 - Hitch Assy. - Telescoping - Attaches to Tow Vehicle and Provides Hook Up Point for Short Tongue Assy.
$105.00
900046
900046 - Spindle Shaft - 25mm Dia. With 2" Saddle and Tapped 1/2" NF Blade Bolt Mounting Hole (For Spindle Assy. 258014 and 258020)
$39.15
900049
900049 - Battery Box Assy. - Holds Battery 264004 and Lawn & Garden Size Battery
$41.91
900050
900050 - Hitch Draw Bar - Hook Up Tab, Mounts to Telescoping Hitch Assy. 900028
$6.72
900051
900051 - Depth Gage - Height Adjust Gage for Finish Cut Mowers
$11.41
900052
900052 - Tank Support - Rear Support for Gas Tank (Used on All Finish Cut Models Except Models E60B and H40B)
$16.05
900058
900058 - Hitch Pivot - For ATV Tongue Assy. 900083, 1/2" Mounting Hole (Used on All Rough Cut and Pro Finish Cut Models)
$42.09
900061
900061 - Pivot Arm - Connects Mower Deck to Carrier Arms on All Rough Cut and Pro Finish Cut Models
$24.72
900062
900062 - Height Adjust Nut - Tube/Nut Portion of Manual Height Adjust System on 57" Rough Cut and Pro Finish Cut Models
$14.55
900066
900066 - Screw Adjuster - Treaded Portion of Manual Height Adjust System on 57" Rough Cut and Pro Finish Cut Models
$17.79
900082
900082 - Tongue - Tubular 90 Degree Arm Portion for ATV Tongue Assy. 900083 and 900084
$63.66
900083
900083 - ATV Tongue Assy. - For All Rough Cut and Pro Finish Cut Models (Includes all Mounting Hardware and Pins)
$120.00
900123
900123 - Carrier Arm - Runs Front to Back and Holds Tires (Used on All Pro Finish Cut Models)
$68.34
900124
900124 - Cross Brace Tube - Cross Tubes That Mount to Carrier Arms 900123 (Used on All Pro Finish Cut Models)
$65.40
900125
900125 - Rear Wheel Support - Mounting Location for Rear Wheel Assy. on Pro Finsih Cut Models
$48.18
900130
900130 - Short Tongue - Main Tubular Portion of Short Tongue Assy. 900138
$34.17
900132
900132 - Hitch Draw Bar - Hook Up Tab, Mounts to Rear Hitch Assy. 900137
$6.81
900133
900133 - Rear Hitch - Main Tubular Portion of Rear Hitch Assy. 900137
$32.76
900134
900134 - Caster Support - Support for Front Wheel Assy. and Fork on Front Floatation Kit (Used on All Pro Finish Cut Models)
$41.73
900135
900135 - Rear Wheel Mount - Clamp on Mount for Rear Floatation Kit on All Pro Finish Cut Models
$24.00
900136
900136 - Long Tongue Assy. - Extension That Makes Short Tongue Assy. 900138 Longer
$42.00
900137
900137 - Rear Hitch Assy. - Used to Mount Multiple Finish Cut Mowers Together (Used on All Pro Finish Cut Models)
$63.00
900138
900138 - Short Tongue Assy. - Mounts Finish Cut Mower to Tow Hitch 900028 (Used on All Pro Finish Cut Models)
$66.00
900139
900139 - Housing Assy. - Welded Steel Design With 4-Bolt Flange, Bearings Installed (For Spindle Assy. 258020)
$89.25
900148
900148 - Caster Fork - Front Wheel Assy. Mounting Location (Includes 1" Washers) (Used on All Rough Cut and Pro Finish Cut Models)
$32.52
900182
900182 - Idler Arm Assy. - Tensions Belt (Includes Bronze Bearings) (Used on Models C60K, C60H, C60V, C60BE, Pro60K & Pro60V) (Replaces 900025)
$17.19