Home > AcrEase Rough Cut Mowers > Model MR55T

Model MR55T

57" Model with Tecumseh Enduro Engine (17HP)

Please click the following link to download a parts diagram.

http://www.kunzeng.com/parts-diagrams/

Products (Total Items: 153 )
Sort by:
3905
003905 - Wetlands Kit for all Rough Cut Models
$645.00
3907
003907 - Rear Floatation Kit for all Rough Cut Models (Note: On 57" Models it will also be necessary to purchase 2 of the Cross Brace Tubes Part # 900113. If the Electric Lift Kit option is installed Cross Brace Tubes are not necessary.)
$165.00
3908
003908 - Front Floatation Kit for all Rough Cut Models (Note: On 57" Models it will also be necessary to purchase 2 of the Cross Brace Tubes Part # 900113. If the Electric Lift Kit option is installed Cross Brace Tubes are not necessary.)
$195.00
3909
003909 - Electric Lift Kit for all 57" Rough Cut Models
$770.00
202019
202019 - Hex Head Bolt - 5/16" x 3/4" Long
$0.18
202041
202041 - Hex Head Bolt - 3/8" x 1-3/4" Long
$0.42
202061
202061 - Hex Head Bolt - 1/2" x 3" Long
$1.29
202063
202063 - Hex Head Bolt - 1/2" x 3-1/2" Long
$1.68
202064
202064 - Hex Head Bolt - 1/2" x 3-3/4" Long
$1.95
202140
202140 - Hex Head Bolt - 5/8" x 7.5"
$6.65
202141
202141 - Blade Bolt - 3/4" x 1-1/4" NF (Will Automatically Upgrade to Blade Bolt 202154)
$3.99
202142
202142 - Hex Head Bolt - 5/8" x 12.0"
$8.67
202150
202150 - Hex Head Bolt - 1/2" x 4-1/4" Long
$1.23
202154
202154 - Blade Bolt - 3/4" x 1-1/2" NF (Longer Upgrade for Blade Bolt 202141)
$3.99
204005
204005 - Eye Bolt - 5/16" x 5" Usable Length
$0.81
204016
204016 - Eye Bolt - 3/8" x 8" Usable Length
$9.54
212001
212001 - Hex Nut - 5/16"
$0.06
212002
212002 - Hex Nut - 3/8"
$0.09
212003
212003 - Hex Nut - 1/2"
$0.21
212009
212009 - Hex Nut - 1.00" - 14NF
$2.31
212013
212013 - Hex Nut - 5/8"
$0.42
212015
212015 - Centered Lock Nut - 5/8"
$0.75
212021
212021 - Hex Jam Nut - 5/8"
$0.72
214001
214001 - Lock Washer - 5/16"
$0.03
214002
214002 - Lock Washer - 3/8"
$0.06
214003
214003 - Lock Washer - 1/2"
$0.12
214005
214005 - Std. Flat Washer - 3/8"
$0.09
214006
214006 - Std. Flat Washer - 1/2"
$0.36
214013
214013 - Lock Washer - 1.00"
$0.60
214014
214014 - Machinery Washer - 1.00" I.D. x 18 GA Thick
$0.24
214017
214017 - Std. Flat Washer - 5/16"
$0.06
214018
214018 - Machinery Washer - 5/8" I.D. x 1" O.D.
$0.21
214019
214019 - Machinery Washer - 1" I.D. x 1.5" O.D. x 10GA
$0.36
214020
214020 - Lock Washer - 5/8"
$0.24
214021
214021 - Cup Washer - 5/8" I.D. x 1-3/4" O.D. (Wheel Bearing Protector)
$1.23
214023
214023 - Machinery Washer - 1.25" I.D. x 14 GA Thick
$0.51
214027
214027 - Shoulder Washer - .52" Bore, 3/4" O.D., 1.11" Flange, Nylon
$0.78
214029
214029 - Std. Flat Washer - 5/8"
$0.45
214030
214030 - Cup Washer - 5/8" I.D. x 2-7/16" O.D. (Wheel Bearing Protector)
$1.50
216002
216002 - Wire Lock Pin - 5/16" x 2-1/2" Opening
$8.76
216009
216009 - Screw Pin Shackle Clevis - 1/2" Body Dia.
$11.34
216011
216011 - Wire Lock Pin - 1/2" x 3-1/2" Opening
$10.74
222005
222005 - Worm Drive Hose Clamp - 7-7/8" to 9-1/8" Clamping Dia.
$14.31
222012
222012 - Single Split Collar - 1" I.D. x 1/2: Thick
$7.11
225003
225003 - Compression Spring - 3" Long x 1-3/32" O.D. x .135" Wire dia.
$9.81
225005
225005 - Compression Spring - 4.50" Long x 1-3/32" O.D. x .125" Wire dia.
$13.92
226005
226005 - Tire - 5.30/4.50 x 6, 4 Ply Stud - Replacement for 226004 & 226013 Wheel Assy.
$47.70
226006
226006 - Tire - 15/600 x 6, 4 Ply Turf - Replacement for 226003 & 226012 Wheel Assy.
$40.64
226012
226012 - Wheel Assy. - 15/600 x 6, 4 Ply Turf (Includes Tire, Rim & Bearings) - Offset
$93.78
226013
226013 - Wheel Assy. - 5.30/4.50 x 6, 4 Ply Stud) (Includes Tire, Rim & Bearings) - Centered
$83.94
226014
226014 - Wheel Assy. - 15/600 x 6, Urethane Foam - Flatproof (Includes Tire, Rim & Bearings) - Offset
$182.21
226015
226015 - Wheel Assy. - 5.30/4.50 x 6, Urethane Foam - Flatproof (Includes Tire, Rim & Bearings) - Centered
$142.43
235061
235061 - Connector - Six Contact Socket
$2.58
235063
235063 - Battery Wiring Harness - Two Wire Harness for Electric Lift (Connects Control Box to 235066)
$13.44
235065
235065 - Wiring Harness - Two Wire Harness for Electric Lift (Connects Control Box to 235067)
$16.50
235066
235066 - Battery Clip Harness - Two Wire Harness with Battery Clips (Connects to 235065 or 235070)
$20.76
235067
235067 - Extension Cable - Two Wire Harness - 9' Long (Connects 235065 to 235070)
$24.27
235070
235070 - Actuator Wiring Assy. - Two Wire Harness (Connects 235065 or 235067 to Actuator)
$15.00
237003
237003 - Electric Linear Actuator - 8" Stroke, 1500 lbs Lift Capacity (Used on Electric Lift Kits and Till-Ease Model 543(2022 and Newer))
$531.60
238004
238004 - "V" Belt - B Section, 96" O.C.
$78.78
241001
241001 - Flat Idler Pulley - 4" O.D. x 3/8" Hole (Steel)
$19.35
241008
241008 - "V" Sheave - 7-1/2" Dia. - 25 mm Bore (Spindle Pulley)
$62.70
241009
241009 - Flat Idler Pulley - 4" O.D. x 1/2" Hole (Steel)
$19.35
241010
241010 - "V" Sheave - 5" Dia. 1" Bore (Engine Drive Pulley)
$37.74
243005
243005 - Bronze Bearing - 1/2"I.D. x 3/4" O.D. x 3/4" Long (Requires 2)
$1.80
243006
243006 - Ball Bearing - 6206 - 2RST (Rough Cut Mower Spindles)
$14.55
243007
243007 - Wheel Bearing - 1-3/8" O.D. x 5/8" I.D. - Precision Sealed
$3.45
243010
243010 - Plastic Bearing - 1-3/8" O.D. x 1.00" I.D., Flange, Nylon
$2.28
243015
243015 - Wheel Bearing - 2" O.D. x 1" I.D. - Precision Sealed
$9.45
243016
243016 - Bronze Bearing - 5/8"I.D. x 3/4" O.D. x 3/4" Long (Requires 2)
$1.80
257526
257526 - Oil Filter - Tecumseh (36563)
$9.95
257527
257527 - Air Filter - Tecumseh (36356) (Filter Only Use 257528 Also)
$17.75
257528
257528 - Pre-Cleaner - Tecumseh (36357) (Use With 257527 Air Filter)
$12.00
258015
258015 - Spindle Assy. - Includes Housing with Bearings, Shaft with Blade Bolt and Pulley
$206.28
258022
258022 - Spindle Assy. - Includes Housing with Bearings, Shaft with Blade Bolt and Pulley
$220.20
259002
259002 - Mower Blade - 2-1/2" Wide, 30" Long, 3/4" Hole
$49.62
260004
260004 - Roll-Over Valve with Gromet Kit - Used on Fuel Tank 277034 & 277040
$19.23
264000
264000 - Solenoid - 12V, 1/4" Posts (Replaces 264002)
$41.04
264001
264001 - Ignition Switch - 5 Prong, Thread/Nut Mounted
$24.18
264003
264003 - Hour/Tach Meter - Digital Read Out
$67.08
264004
264004 - Battery - 12V, AGM (Absorbed Glass Mat), Sealed
$75.00
264006
264006 - Fuse Holder - Thread/Nut Mounted (Holds Glass Tube Type 1/4" x 1-1/4" Fuses)
$8.28
264008
264008 - Rocker Switch - 6 Prong, DTDP, Snap-in Mount
$26.91
264009
264009 - Fuse - 30 Amp (Glass Tube, 1/4" x 1-1/4")
$1.41
269000
269000 - Choke Control - 20" Length, Pull Knob Style
$10.38
269001
269001 - Throttle Control - 15" Length, Lever Style
$13.38
275001
275001 - Decal - Control Panel - Starting Instructions
$3.39
275002
275002 - Decal - Warning - General
$1.65
275003
275003 - Decal - Danger - Cut Finger
$0.91
275007
275007 - Decal - Warning - Belt Sheild
$0.81
275011
275011 - Decal - Clutch Engagement
$1.47
275019
275019 - Decal - Name - ,Kunz
$1.50
275020
275020 - Decal - Lift Control
$3.00
275021
275021 - Decal - Name - AcrEase
$2.01
275022
275022 - Decal - Name - 57" Rough Cut
$1.59
277002
277002 - Grommet - 3/8" ID x 7/8" OD, Rubber
$0.42
277004
277004 - Tube Spacer - .32" ID x 3/4" OD x 3/4" Long, Nylon
$1.02
277011
277011 - Handle Grip - 4" x 1-1/2", Black Vinyl
$1.83
277013
277013 - Gas Cap - Venting Style (For Fuel Tank 277010 and with Fuel Tank 277034 Without Vent Hose)
$25.59
277025
277025 - Tire Sealer - 32 oz Bottle (Each AcrEase Rough Cut Mower Tire Requires 16 oz)
$27.60
277030
277030 - Cable Clamp - 5/16" Fixed Diameter, Plastic, Single Hole Mount
$0.39
277034
277034 - Fuel Tank 3 Gal. (Replaces Fuel Tank 277010)
$238.95
277041
277041 - Fuel Tank Grommet (Bottom Petcock Location) (Used on 277010, 277034 & 277040)
$5.94
277042
277042 - Spare Key for Indak Ignition Switches (Used on 264001 & 264010)
$1.39
500010
500010 - Control Panel - Holds Switch and Fuse for Electric Lift
$12.18
600071
600071 - Spacer - 1.32" O.D. x .133" Wall x 2.19" Long (Drive Pulley Spacer Used on All Manual Clutch Models Except MR55K)
$2.55
600126
600126 - Flap Retainer Strip - Mounts Front Safety Belting on all 57" Rough Cut Models
$13.89
600133
600133 - Belt Sheild - Used on All 57" Rough Cut Models (Same Sheild Used on Both Sides)
$22.17
600136
600136 - Brake Stud - Mounts to Clutch Arm on All Manual Clutch Mower Models Except Model H40B-8HP
$4.41
600142
600142 - Upper Pivot Support - Holds Height Adjust Nut 900062 on All 57" Rough Cut Models
$6.09
600143
600143 - Safety Belting - Front Rubber Flap on All 57" Rough Cut Models
$47.70
600146
600146 - Crank Arm - For Manual Height Adjust System on All Rough Cut and Pro Model Mowers (Incluces Press-on Nut)
$11.04
600158
600158 - Bearing Spacer - 1-1/2" OD x 1.41" Long (For Spindle Assy. 258015)
$5.85
600159
600159 - Pulley Spacer - 1-1/2" OD x 1.98" Long (For Spindle Assy. 258015)
$3.60
600172
600172 - Engine Support Bracket - Engine Mount for All 57" Rough Cut Models (Also Replaces 900071)
$40.98
600185
600185 - Top Long Support - Actuator Mount for Actuator 237000 and 44" Rough Cut Manual Height Adjust Lift Systems
$10.20
600186
600186 - Top Short Support - Actuator Mount for Actuator 237000 and 44" Rough Cut Manual Height Adjust Lift Systems
$8.52
600189
600189 - Idler Spacer Block - Support Spacer Used Under Fixed Idler Pulley 241009 on All 57" Rough Cut Models
$5.31
600195
600195 - Clamping Flat - Upper Flat Used to Mount Floatation Kits on Rough Cut and Pro Model Mowers
$7.92
600238
600238 - Actuator Bracket - Mounts on Both Sides of Actuator 237003
$9.84
600239
600239 - Top Long Support - Actuator Mount for Actuator 237003
$8.52
600240
600240 - Top Short Support - Actuator Mount for Actuator 237003
$6.90
600269
600269 - Height Adjust Spacer - Mounts Between Upper End of Actuator Bracket 600238 and Actuator 237003
$1.68
600271
600271 - Bearing Spacer - 1-1/2" OD x 3.33" Long (For Spindle Assy. 258022 and 258023)
$14.85
600294
600294 - Clutch Arm - Engages Idler Arm Assy. 900065 (Used on All 57" Rough Cut Models Except MR55KE, MR55VE & MR55BE) (Replaces 900063)
$16.71
600301
600301 - Wheel Bearing Spacer (Used on 226003 & 226008)
$4.42
600302
600302 - Wheel Bearing Spacer (Used on 226004, 226007 & 226009)
$4.51
600305
600305 - Control Panel (Replaces 900023 & 900111)
$21.30
600306
600306 - Tank Support - Rear Support for Gas Tank (Used on All Rough Cut Models) (Replaces 900079)
$14.55
600308
600308 - Spanner Tube - Used on Rear Wheel Assemblies 226012 and 226014
$4.56
600309
600309 - Spanner Tube - Used on Front Wheel Assemblies 226013, 226015 & 226016
$5.49
900049
900049 - Battery Box Assy. - Holds Battery 264004 and Lawn & Garden Size Battery
$41.91
900058
900058 - Hitch Pivot - For ATV Tongue Assy. 900083, 1/2" Mounting Hole (Used on All Rough Cut and Pro Finish Cut Models)
$42.09
900061
900061 - Pivot Arm - Connects Mower Deck to Carrier Arms on All Rough Cut and Pro Finish Cut Models
$24.72
900062
900062 - Height Adjust Nut - Tube/Nut Portion of Manual Height Adjust System on 57" Rough Cut and Pro Finish Cut Models
$14.55
900065
900065 - Idler Arm Assy. - Tensions Belt (Includes Bronze Bearings) (Used on All 57" Manual Clutch Rough Cut Models With 1/2" Pivot Bolt)
$19.67
900066
900066 - Screw Adjuster - Treaded Portion of Manual Height Adjust System on 57" Rough Cut and Pro Finish Cut Models
$17.79
900075
900075 - Spindle Shaft - 30mm Dia. With 2-1/2" Saddle and Tapped 3/4" NF Blade Bolt Mounting Hole (For Spindle Assy. 258015, 258022 & 258023)
$45.24
900078
900078 - Housing Assy. - Welded Steel Design With 4-Bolt Flange, Bearings Installed (For Spindle Assy. 258015)
$85.53
900082
900082 - Tongue - Tubular 90 Degree Arm Portion for ATV Tongue Assy. 900083 and 900084
$63.66
900083
900083 - ATV Tongue Assy. - For All Rough Cut and Pro Finish Cut Models (Includes all Mounting Hardware and Pins)
$120.00
900091
900091 - Rear Tire Extension - Mounts on Rear Right Corner of Rough Cut Mower (Part of Wetlands Kit)
$27.60
900092
900092 - Lower Actuator Mount - Provides a Mounting Location on Mower Deck for Actuator Shaft (Part of Electric Lift Kit for 57" Rough Cut Models)
$23.49
900093
900093 - Upper Actuator Mount - Cross Tube That Provides an Upper Mounting Location for Actuator (Part of Electric Lift Kit for 57" Rough Cut Models)
$72.45
900106
900106 - Carrier Arm - Runs Front to Back and Holds Tires (Used on All 57" Rough Cut Mowers)(Replaces 900072 & 900095, Also Requires Two of 243010)
$104.34
900107
900107 - Reciever Assy. - Clamp on Mount for Front and Rear Floatation Kit on All Rough Cut Models
$22.11
900108
900108 - Caster Support - Support for Front Wheel Assy. and Fork on Front Floatation Kit for All Rough Cut Models
$30.12
900109
900109 - Rear Wheel Support - Support for Rear Wheel Assy. on Rear Floatation Kit for All Rough Cut Models
$43.68
900113
900113 - Cross Brace Tube Assy. - Cross Tubes Used to Mount Front and Rear Floatation Kits on 57" Rough Cut Models (900110 with Mounting Bolts)
$65.00
900148
900148 - Caster Fork - Front Wheel Assy. Mounting Location (Includes 1" Washers) (Used on All Rough Cut and Pro Finish Cut Models)
$32.52
900149
900149 - Caster - Dual Wheel Assy. Mounting Location For Wetlands Kit (Includes 1" Washers)
$29.40
900160
900160 - Housing Assy. - Welded Steel Design With 4-Bolt Flange, Bearings Installed (For Spindle Assy. 258022 and 258023)
$103.53
900193
900193 - Idler Arm Assy. - Tensions Belt (Includes Bronze Bearings) (Used on All 57" Manual Clutch Rough Cut Models With 5/8" Pivot Bolt)
$19.67