Home > AcrEase Rough Cut Mowers > Model MR55KEI

Model MR55KEI

57" Model with Kohler Confidant EFI (Fuel Injection) Engine (27HP) (Electric Clutch)

Please click the following link to download a parts diagram.

http://www.kunzeng.com/parts-diagrams/
Products (Total Items: 132 )
Sort by:
3905
003905 - Wetlands Kit for all Rough Cut Models
$645.00
3907
003907 - Rear Floatation Kit for all Rough Cut Models (Note: On 57" Models it will also be necessary to purchase 2 of the Cross Brace Tubes Part # 900113. If the Electric Lift Kit option is installed Cross Brace Tubes are not necessary.)
$165.00
3908
003908 - Front Floatation Kit for all Rough Cut Models (Note: On 57" Models it will also be necessary to purchase 2 of the Cross Brace Tubes Part # 900113. If the Electric Lift Kit option is installed Cross Brace Tubes are not necessary.)
$195.00
3909
003909 - Electric Lift Kit for all 57" Rough Cut Models
$770.00
202019
202019 - Hex Head Bolt - 5/16" x 3/4" Long
$0.15
202041
202041 - Hex Head Bolt - 3/8" x 1-3/4" Long
$0.39
202061
202061 - Hex Head Bolt - 1/2" x 3" Long
$1.26
202063
202063 - Hex Head Bolt - 1/2" x 3-1/2" Long
$1.50
202064
202064 - Hex Head Bolt - 1/2" x 3-3/4" Long
$1.47
202140
202140 - Hex Head Bolt - 5/8" x 7.5"
$5.04
202141
202141 - Blade Bolt - 3/4" x 1-1/4" NF (Will Automatically Upgrade to Blade Bolt 202154)
$3.99
202142
202142 - Hex Head Bolt - 5/8" x 12.0"
$8.67
202154
202154 - Blade Bolt - 3/4" x 1-1/2" NF (Longer Upgrade for Blade Bolt 202141)
$3.99
204016
204016 - Eye Bolt - 3/8" x 8" Usable Length
$1.74
212001
212001 - Hex Nut - 5/16"
$0.06
212002
212002 - Hex Nut - 3/8"
$0.09
212003
212003 - Hex Nut - 1/2"
$0.18
212009
212009 - Hex Nut - 1.00" - 14NF
$2.31
212013
212013 - Hex Nut - 5/8"
$0.39
212015
212015 - Centered Lock Nut - 5/8"
$0.51
212016
212016 - Hex Jam Nut - 1/2"
$0.24
214001
214001 - Lock Washer - 5/16"
$0.03
214002
214002 - Lock Washer - 3/8"
$0.06
214003
214003 - Lock Washer - 1/2"
$0.12
214005
214005 - Std. Flat Washer - 3/8"
$0.09
214006
214006 - Std. Flat Washer - 1/2"
$0.36
214012
214012 - Machinery Washer - 1/2" ID, 14 GA Thick
$0.12
214013
214013 - Lock Washer - 1.00"
$0.60
214014
214014 - Machinery Washer - 1.00" I.D. x 18 GA Thick
$0.30
214017
214017 - Std. Flat Washer - 5/16"
$0.06
214018
214018 - Machinery Washer - 5/8" I.D. x 1" O.D.
$0.21
214020
214020 - Lock Washer - 5/8"
$0.21
214023
214023 - Machinery Washer - 1.25" I.D. x 14 GA Thick
$0.51
214027
214027 - Shoulder Washer - .52" Bore, 3/4" O.D., 1.11" Flange, Nylon
$0.69
214029
214029 - Std. Flat Washer - 5/8"
$0.45
214030
214030 - Cup Washer - 5/8" I.D. x 2-7/16" O.D. (Wheel Bearing Protector)
$1.50
216002
216002 - Wire Lock Pin - 5/16" x 2-1/2" Opening
$8.76
216009
216009 - Screw Pin Shackle Clevis - 1/2" Body Dia.
$10.50
216011
216011 - Wire Lock Pin - 1/2" x 3-1/2" Opening
$10.68
222005
222005 - Worm Drive Hose Clamp - 7-7/8" to 9-1/8" Clamping Dia.
$14.31
222012
222012 - Single Split Collar - 1" I.D. x 1/2: Thick
$5.04
225005
225005 - Compression Spring - 4.50" Long x 1-3/32" O.D. x .125" Wire dia.
$4.50
226005
226005 - Tire - 5.30/4.50 x 6, 4 Ply Stud - Replacement for 226004 & 226013 Wheel Assy.
$47.70
226006
226006 - Tire - 15/600 x 6, 4 Ply Turf - Replacement for 226003 & 226012 Wheel Assy.
$40.64
226012
226012 - Wheel Assy. - 15/600 x 6, 4 Ply Turf (Includes Tire, Rim & Bearings) - Offset
$93.78
226013
226013 - Wheel Assy. - 5.30/4.50 x 6, 4 Ply Stud) (Includes Tire, Rim & Bearings) - Centered
$80.27
226014
226014 - Wheel Assy. - 15/600 x 6, Urethane Foam - Flatproof (Includes Tire, Rim & Bearings) - Offset
$182.21
226015
226015 - Wheel Assy. - 5.30/4.50 x 6, Urethane Foam - Flatproof (Includes Tire, Rim & Bearings) - Centered
$142.43
235061
235061 - Connector - Six Contact Socket
$2.28
235063
235063 - Battery Wiring Harness - Two Wire Harness for Electric Lift (Connects Control Box to 235066)
$14.91
235065
235065 - Wiring Harness - Two Wire Harness for Electric Lift (Connects Control Box to 235067)
$16.41
235066
235066 - Battery Clip Harness - Two Wire Harness with Battery Clips (Connects to 235065 or 235070)
$20.76
235067
235067 - Extension Cable - Two Wire Harness - 9' Long (Connects 235065 to 235070)
$26.19
235070
235070 - Actuator Wiring Assy. - Two Wire Harness (Connects 235065 or 235067 to Actuator)
$15.00
237003
237003 - Electric Linear Actuator - 8" Stroke, 1500 lbs Lift Capacity (Used on Electric Lift Kits and Till-Ease Model 543(2022 and Newer))
$565.14
238004
238004 - "V" Belt - B Section, 96" O.C.
$78.78
241001
241001 - Flat Idler Pulley - 4" O.D. x 3/8" Hole (Steel)
$19.35
241008
241008 - "V" Sheave - 7-1/2" Dia. - 25 mm Bore (Spindle Pulley)
$58.08
241009
241009 - Flat Idler Pulley - 4" O.D. x 1/2" Hole (Steel)
$19.35
243000
243000 - Bronze Bearing - 1/2"I.D. x 3/4" O.D. x 1.50" Long
$5.40
243006
243006 - Ball Bearing - 6206 - 2RST (Rough Cut Mower Spindles)
$13.96
243010
243010 - Plastic Bearing - 1-3/8" O.D. x 1.00" I.D., Flange, Nylon
$3.30
243015
243015 - Wheel Bearing - 2" O.D. x 1" I.D. - Precision Sealed
$9.45
257503
257003 - Oil Filter - Kohler (52-050-02-S)
$12.97
257534
257534 - Air Filter - Kohler (16-083-01-S) (Filter Only Use 257535 Also)
$34.47
257535
257535 - Pre-Cleaner - Kohler (16-083-02-S) (Use with 257534 Air Filter)
$5.97
257538
257538 - Manifold/Muffler (Single Piece) (Used on Kohler Confidant Engines - Replaces Older Two Piece Systems)
$120.03
258018
258018 - Electric Clutch - 200 ft-lb, 5" "V" Sheave, 1" Bore
$283.41
258022
258022 - Spindle Assy. - Includes Housing with Bearings, Shaft with Blade Bolt and Pulley
$214.32
259002
259002 - Mower Blade - 2-1/2" Wide, 30" Long, 3/4" Hole
$48.03
260004
260004 - Roll-Over Valve with Gromet Kit - Used on Fuel Tank 277034 & 277040
$19.23
264003
264003 - Hour/Tach Meter - Digital Read Out
$67.08
264004
264004 - Battery - 12V, AGM (Absorbed Glass Mat), Sealed
$64.36
264005
264005 - PTO Switch - Pull Knob for On/Off, Snap-in Mount
$28.65
264006
264006 - Fuse Holder - Thread/Nut Mounted (Holds Glass Tube Type 1/4" x 1-1/4" Fuses)
$9.93
264008
264008 - Rocker Switch - 6 Prong, DTDP, Snap-in Mount
$26.91
264009
264009 - Fuse - 30 Amp (Glass Tube, 1/4" x 1-1/4")
$1.41
264010
264010 - Ignition Switch - 7 Prong, Thread/Nut Mounted
$15.75
264015
264015 - Fuse - 20 Amp (Mini Blade Type - Use Only With Inline Fuse Holders)
$0.78
269008
269008 - Throttle Control - 46" Length, Lever Style
$16.29
275001
275001 - Decal - Control Panel - Starting Instructions
$3.36
275002
275002 - Decal - Warning - General
$1.65
275003
275003 - Decal - Danger - Cut Finger
$0.91
275007
275007 - Decal - Warning - Belt Sheild
$0.81
275019
275019 - Decal - Name - ,Kunz
$1.47
275020
275020 - Decal - Lift Control
$3.00
275021
275021 - Decal - Name - AcrEase
$2.01
275022
275022 - Decal - Name - 57" Rough Cut
$1.59
277002
277002 - Grommet - 3/8" ID x 7/8" OD, Rubber
$0.36
277025
277025 - Tire Sealer - 32 oz Bottle (Each AcrEase Rough Cut Mower Tire Requires 16 oz)
$23.97
277030
277030 - Cable Clamp - 5/16" Fixed Diameter, Plastic, Single Hole Mount
$0.09
277035
277035 - Gas Cap - Audible Click / Tethered, Non-Venting (Only Use with Fuel Tanks with Vent Hose)
$22.08
277040
277040 - Fuel Tank 3 Gal., 3-Layer
$257.19
277041
277041 - Fuel Tank Grommet (Bottom Petcock Location) (Used on 277010, 277034 & 277040)
$5.94
277042
277042 - Spare Key for Indak Ignition Switches (Used on 264001 & 264010)
$1.39
500010
500010 - Control Panel - Holds Switch and Fuse for Electric Lift
$11.52
600133
600133 - Belt Sheild - Used on All 57" Rough Cut Models (Same Sheild Used on Both Sides)
$17.40
600142
600142 - Upper Pivot Support - Holds Height Adjust Nut 900062 on All 57" Rough Cut Models
$6.81
600143
600143 - Safety Belting - Front Rubber Flap on All 57" Rough Cut Models
$47.70
600146
600146 - Crank Arm - For Manual Height Adjust System on All Rough Cut and Pro Model Mowers (Incluces Press-on Nut)
$6.12
600172
600172 - Engine Support Bracket - Engine Mount for All 57" Rough Cut Models (Also Replaces 900071)
$67.59
600189
600189 - Idler Spacer Block - Support Spacer Used Under Fixed Idler Pulley 241009 on All 57" Rough Cut Models
$5.85
600195
600195 - Clamping Flat - Upper Flat Used to Mount Floatation Kits on Rough Cut and Pro Model Mowers
$9.06
600198
600198 - Clutch Stop - Prevents Electric Clutch From Spinning (Used on All Electric Clutch Models)
$4.41
600200
600200 - Spacer - 1.32" O.D. x .133" Wall x 1" Long (Spacer For Electric Clutch on 57" Rough Cut Mowers)
$1.77
600238
600238 - Actuator Bracket - Mounts on Both Sides of Actuator 237003
$11.13
600239
600239 - Top Long Support - Actuator Mount for Actuator 237003
$9.42
600240
600240 - Top Short Support - Actuator Mount for Actuator 237003
$7.59
600305
600305 - Control Panel (Replaces 900023 & 900111)
$21.78
600306
600306 - Tank Support - Rear Support for Gas Tank (Used on All Rough Cut Models) (Replaces 900079)
$13.41
600308
600308 - Spanner Tube - Used on Rear Wheel Assemblies 226012 and 226014
$4.56
600309
600309 - Spanner Tube - Used on Front Wheel Assemblies 226013, 226015 & 226016
$5.49
900049
900049 - Battery Box Assy. - Holds Battery 264004 and Lawn & Garden Size Battery
$41.91
900058
900058 - Hitch Pivot - For ATV Tongue Assy. 900083, 1/2" Mounting Hole (Used on All Rough Cut and Pro Finish Cut Models)
$42.09
900061
900061 - Pivot Arm - Connects Mower Deck to Carrier Arms on All Rough Cut and Pro Finish Cut Models
$24.72
900062
900062 - Height Adjust Nut - Tube/Nut Portion of Manual Height Adjust System on 57" Rough Cut and Pro Finish Cut Models
$15.84
900066
900066 - Screw Adjuster - Treaded Portion of Manual Height Adjust System on 57" Rough Cut and Pro Finish Cut Models
$19.05
900075
900075 - Spindle Shaft - 30mm Dia. With 2-1/2" Saddle and Tapped 3/4" NF Blade Bolt Mounting Hole (For Spindle Assy. 258015, 258022 & 258023)
$46.71
900082
900082 - Tongue - Tubular 90 Degree Arm Portion for ATV Tongue Assy. 900083 and 900084
$66.30
900083
900083 - ATV Tongue Assy. - For All Rough Cut and Pro Finish Cut Models (Includes all Mounting Hardware and Pins)
$120.00
900091
900091 - Rear Tire Extension - Mounts on Rear Right Corner of Rough Cut Mower (Part of Wetlands Kit)
$28.95
900092
900092 - Lower Actuator Mount - Provides a Mounting Location on Mower Deck for Actuator Shaft (Part of Electric Lift Kit for 57" Rough Cut Models)
$25.65
900093
900093 - Upper Actuator Mount - Cross Tube That Provides an Upper Mounting Location for Actuator (Part of Electric Lift Kit for 57" Rough Cut Models)
$79.74
900106
900106 - Carrier Arm - Runs Front to Back and Holds Tires (Used on All 57" Rough Cut Mowers)(Replaces 900072 & 900095, Also Requires Two of 243010)
$112.59
900107
900107 - Reciever Assy. - Clamp on Mount for Front and Rear Floatation Kit on All Rough Cut Models
$26.13
900108
900108 - Caster Support - Support for Front Wheel Assy. and Fork on Front Floatation Kit for All Rough Cut Models
$31.86
900109
900109 - Rear Wheel Support - Support for Rear Wheel Assy. on Rear Floatation Kit for All Rough Cut Models
$43.68
900113
900113 - Cross Brace Tube Assy. - Cross Tubes Used to Mount Front and Rear Floatation Kits on 57" Rough Cut Models (900110 with Mounting Bolts)
$65.00
900128
900128 - Idler Arm Assy. - Tensions Belt (Includes Bronze Bearing) (Used on Models MR55KE, MR55VE & MR55BE) (Replaces 900040)
$15.42
900148
900148 - Caster Fork - Front Wheel Assy. Mounting Location (Includes 1" Washers) (Used on All Rough Cut and Pro Finish Cut Models)
$36.54
900149
900149 - Caster - Dual Wheel Assy. Mounting Location For Wetlands Kit (Includes 1" Washers)
$36.15
900160
900160 - Housing Assy. - Welded Steel Design With 4-Bolt Flange, Bearings Installed (For Spindle Assy. 258022 and 258023)
$103.53